My Air Conditioner Is Not Turning On
It’s not uncommon for your air conditioner to stop working during the summer months. While it’s frustrating, there are a few things you can check before calling a professional.
If your air conditioner is not turning on, there are a few potential causes. First, check to make sure that the unit is plugged in and receiving power. Next, see if the thermostat is set correctly. If the thermostat is set too low, the air conditioner will not turn on. Finally, check the air filter to see if it needs to be replaced. If none of these solutions solve the problem, you may need to call a professional like Liberty Plumbing, Heating & Air Conditioning for your air conditioning repair.
The AC Unit Won’t Turn On – Check the Basics
If your air conditioner won’t turn on, start by checking the circuit breaker. If it’s tripped, try resetting it.
If this doesn’t solve the problem, check the thermostat. A thermostat that’s set too low or not responding will prevent the air conditioner from turning on. You need a professional to fix this problem.
However, if the thermostat is set correctly, the next thing to check is the air filter. A clogged air filter can restrict airflow and prevent the unit from turning on.
If you’ve checked all of these things and your air conditioner still won’t turn on, it’s time to call a professional for help.
Your Air Conditioner Doesn’t Cool Evenly
If your air conditioner isn’t cooling evenly, here are the likely causes. First, check to see if the vents are open and unobstructed. If they’re not, this can restrict airflow and prevent the unit from cooling properly.
Another potential cause is a dirty air filter. A clogged air filter can obstruct proper airflow and prevent the unit from cooling evenly.
If these things don’t solve the problem, you may need to have your air conditioner serviced by a professional.
Your ductwork transports cooled air from your AC unit to the rooms in your home. If there are leaks in your ductwork, this can cause your air conditioner to work harder than it needs to and prevent it from cooling evenly. The amount of sunlight that finds its way into your home can also be a factor.
Our expert technicians can help you study your home and then come up with a solution to this problem so that you’ll enjoy uniform cooling in every space.
My Air Conditioner is Not Cooling My Home
If your air conditioner is not cooling your home, there could be a problem with the control board or the refrigerant. Please call your professional HVAC contractor to take care of this issue.
Your AC refrigerant is not safe for the environment, so please don’t try to fix this problem yourself.
The Condenser Unit Repeatedly Turns on And Off
If your condenser unit repeatedly turns on and off, there could be a problem with the pressure switch. This switch is responsible for turning the unit on and off, so if it’s not working properly, it can cause the unit to cycle on and off.
Your AC’s outer condenser unit houses the safety controls that shut down the system when the pressure gets too low inside the unit. The system should start up again when the pressure picks up. Refrigerant levels and temperature can affect the pressure level. If you’re having this problem, call your professional HVAC contractor to assess the safety controls.
Short cycling can also cause your AC to turn on and off. Short cycling occurs when your AC turns on, cools the air, and then turns off again before reaching the temperature on the thermostat or reaches the temperature too early. This means that your unit never completes a cycle. This can happen if the thermostat is set too low or if there’s a problem with the unit itself. If you’re having this problem, please call your professional HVAC contractor.
Common Causes of Air Conditioner Issues
If your AC isn’t working, one of the first things your HVAC technician should check is the wiring. Over time, wiring can become loose or corroded, which can cause problems with your AC unit. For this task, please call a professional for help.
Short cycling is when your AC turns on, cools the air, and then turns off again before completing a full cycle. It shows that your AC cannot reach the thermostat temperature setting. Short cycling can wear your system down and cause it to break prematurely. Contact a professional to have your AC unit checked for this problem.
The compressor is the heart of your AC unit, so if it’s not working properly, your AC won’t work properly. The compressor pumps compressed refrigerant gas to the evaporator coils. This refrigerant gas then goes through your AC system, cooling your home.
There are a few different things that can cause compressors to fail. Such as old age, overheating, and lack of lubrication. If you think your compressor might be failing, call a professional for help.
Low Refrigerant Levels
Another common air conditioner issue is low refrigerant levels. Your AC unit needs refrigerant to cool the air, so if the level is low, it can cause problems with your AC unit. Refrigerant levels can drop as a result of leaks in the system. You should only add refrigerant to your AC unit if you’re a trained professional. Please don’t try to do this yourself.
Dirty Evaporator Coils, Condensers And Filters
If your evaporator coils, condensers or filters are dirty, it can prevent proper airflow and cause your AC unit to work harder than necessary. This can lead to premature wear and tear on your system. To prevent this problem, be sure to regularly clean your evaporator coils, condensers and filters.
If your AC unit isn’t working properly, one of the first things you should check is the thermostat. If it’s not set correctly, it can cause problems with your AC unit. Make sure the thermostat is set to the correct temperature. You should also check to see if the batteries need to be replaced.
Thermostat problems can occur because your thermostat is analog. Replacing your analog thermostat with a digital one can help to prevent these problems from occurring. Digital thermostats are also safer to have in your home since they don’t contain mercury, which is found in analog models.
If your AC unit has a faulty motor, it can cause the unit to overheat and eventually break down. This is a serious problem that should be fixed by a trained professional. You may have to replace the faulty blower motors to save your air conditioner.
Contact Us to Find out Why Your Air Conditioner is Not Turning on
If you’re having problems with your air conditioner, there are a few things you can do. However, if you’re not comfortable doing these things, or if you’re not sure what to do, call us at Liberty Plumbing, Heating & Air Conditioning. We’re here to help you 24/7. We’ll send a qualified technician to your home to diagnose and fix the problem. Please don’t hesitate to call us today at (951) 760-4215.